CUSTOMER CENTER
051-316-0657~8
Pneumatic nozzle
Small amount fine nozzle (BIM*)
▶ Features
· Fine mist with an average particle diameter of 100μm or less
Air nozzle that generates evenly
· Sprayed at a pressure of 0.1~0.3MPa
Hydraulic nozzle
· A wide range of flow rates can be adjusted
▶ Use
Application, cooling, humidity control, cleaning, dust removal, catalyst denitrification
Steel (raw material, steel making, rolling, surface treatment process)
▶ Specifications
Spray angle: 20°~110°
· Material: Stainless steel, PP
Small amount fine nozzle (BIM*-S)
▶ Features
· Fine mist with an average particle diameter of 30μm or less
Air nozzle that generates evenly
Suction type that does not require a hydraulic pressure device
▶ Use
Application, cooling, humidity control, cleaning, dust removal, catalyst denitrification
▶ Specifications
· Spray angle: 60°, 80°
· Material: Stainless steel
Controlled Small Volume Fine Nozzle (CBIM*)
▶ Features
· Fine mist with an average particle diameter of 100μm or less
Air nozzle that generates evenly
· Sprayed at a pressure of 0.1~0.3MPa
Hydraulic nozzle
· Compact type compared to existing BIM
· A wide range of flow rates can be adjusted and the piston
Built-in type that can turn on/off injection is also available.
▶ Use
Application, cooling, humidity control, cleaning, dust removal, catalyst denitrification
▶ Specifications
Spray angle: 20°~110°
· Material: Stainless steel
* Spray pattern: Fan type (V), circular (J), hollow cone type (K) type available / Fan type catalog is attached as a representative model, and other types can be requested if necessary
Mass Fine Nozzle (GSIM Ⅱ)
▶ Features
· Fine mist with an average particle diameter of 100μm or less
Air-fluid circular nozzle that generates large quantities
When the nose ratio (air consumption/injection) is 130
Average particle diameter is 50μm, maximum particle diameter
150μm low defense design
· Wide range of flow control available
▶ Use
· Cooling, humidity control, combustion, vibration suppression
Steel (steel making, steel making, rolling, surface treatment process)
▶ Specifications
· Spray angle: 20°, 60°
· Material: Stainless steel
Collision type micro nozzle (AKIJet)
▶ Features
Generates homogeneous fine mist (fine mist, tax mist)
Two-fluid circular nozzle
· A suction type that does not require a pressurization device,
Hydraulic pressure type also available
▶ Use
Cooling, humidity control, combustion, mixing of two liquids, granulation
▶ Specifications
· Material: Stainless steel
High impact precision cleaning nozzle (VVEA)
▶ Features
· Fine mist with an average particle diameter of 50μm or more
Air-fluid fan-shaped nozzle to generate
Thin, strong force spraying is possible in the direction of the nozzle thickness
· Spraying at a pressure of about 0.2~0.5MPa
Hydraulic pressure type
· A wide range of flow rates can be adjusted,
Little change in spray angle
▶ Use
· PCB, liquid crystal cleaning
· Steel (surface treatment process)
▶ Specification
· Material: Stainless steel
Bulk micro-aseptic uniform nozzle (DOVEA)
▶ Features
· Fine mist with an average particle diameter of 50μm or more
Air-fluid fan-shaped nozzle that generates large quantities
· Spray at a pressure of about 0.07～0.7MPa
Hydraulic pressure type
· A wide range of flow rates can be adjusted,
Little change in spray angle
· Having an even injection flow rate, it can be used in multiple arrays.
Easy and difficult to pinch due to large foreign body passage
▶ Use
· Cooling
· Steel (steel-making, rolling process)
▶ Specifications
· Material: Stainless steel
One-touch fan nozzle (INVVEA)
▶ Features
This fluid generating one-touch fine mist
Fan nozzle header
Significantly shorten maintenance time by one-touch detachment
· Excellent chemical resistance, with fine particle spray
Very suitable for particle removal
Thin, strong force spraying is possible in the direction of the nozzle thickness
· Can be identified by color according to the nozzle injection amount
▶ Use
· Display, PCB cleaning, etchant application
▶ Specifications
· Spray angle: 60°
· Material: Various resins
Clog Relief Nozzle (SETOJet)
▶ Features
· Fine mist with an average particle diameter of 60μm or less
Air generating circular nozzle
· Resistant to clogging, and viscous liquids
Suitable for spraying
· A suction type that does not require a pressurization device,
Hydraulic pressure type also available
· It has an even injection flow rate, so it is easy for multiple arrangements,
It is difficult to get caught because the foreign body passage is large.
▶ Use
· apply
▶ Specification
· Material: Stainless steel
Ultra-low pressure micro-nozzle (LSIM)
▶ Features
· Fine mist with an average particle diameter of 40μm or more
Air-fluid circular nozzle that generates large quantities
When the average particle diameter is 80μm, the maximum particle diameter
180μm design that does not generate coarse particles
Low running cost due to the use of a blower
· Lightweight and compact type
▶ Use
· apply
▶ Specifications
· Spray angle: 20°
· Material: Stainless steel
Slit Nozzle (PSN)
▶ Features
· Uniform flow rate throughout the spray pattern
Air slit nozzle available
· In case of multiple arrangement of normal nozzles, the hitting power increases.
Therefore, when the distance between the nozzle and the product gets closer, the gap
Occurs, but this product does not have a gap,
Can be used close to the product from 5 to 10 mm
▶ Use
· Display board, PCB cleaning, cooling, and tempering
· Steel (surface treatment process)
▶ Specification
· Material: Stainless steel