CUSTOMER CENTER
051-316-0657~8
Fan nozzle
Standard integral nozzle (VP, VVP)
▶ Features
· The center is strong and gradually weakens across both ends
Fan-shaped injection of flow distribution
· Excellent abrasion resistance
▶ Use
· Surface treatment, cleaning, cooling, application, water film
▶ Specification
· Spray angle: 15°~115°
· Material: B, stainless steel, various resins
(*With ceramic tip type)
Standard integral nozzle (UVVP)
▶ Features
· The center is strong and gradually weakens across both ends
Fan-shaped injection of flow distribution
· Excellent abrasion resistance
· Ultra high molecular weight polyethylene material
▶ Use
· Cleaning, cooling water, coating, polishing
▶ Specifications
· Spray angle: 65°
Material: UPE
Standard detachable nozzle (V, VV)
▶ Features
· The center is strong and gradually weakens across both ends
Fan-shaped injection of flow distribution
When multiple nozzles are arranged, overlap them on both ends of the pattern
When used, the flow distribution can be sprayed evenly over the entire width.
V consists of three parts: spray tip, cap, and adapter.
Only damaged and worn spray tips can be replaced separately
▶ Use
· Cleaning, cooling, coating, water film
▶ Specifications
· Spray angle: 15°~115°
· Material: B, stainless steel, various resins
(*With ceramic tip type)
Standard coin nozzle (CVVP)
▶ Features
· The center is strong and gradually weakens across both ends
Fan-shaped injection coin type with flow distribution
The nozzle is designed to be very thin, so it is attached to the shower pipe.
Even when installed, it does not protrude from the outside of the pipe,
Easy arrangement of nozzles in narrow places
▶ Use
· Cleaning, cooling, and application
▶ Specification
Spray angle: 65°, 80°, 90°
· Material: Stainless steel
One-touch detachable nozzle (INVV)
▶ Features
· The center is strong and gradually weakens across both ends
Fan-shaped injection of flow distribution
Easy to replace with one-touch attachment and detachment
· Excellent chemical resistance and heat resistance
· Can be identified by color according to the amount of injection
(*Resin materials ONLY)
▶ Use
Parts that are difficult to clean, apply, repair and install
▶ Specification
· Spray angle: 50°~115°
Material: PP, PPS, stainless steel
Standard Equal Nozzle (VE, VEP)
▶ Features
· Uniform flow across the spray pattern
Fan-shaped injection of distribution
· Uniform hitting force per unit area
· VE can replace damaged and worn spray tips
▶ Use
· Cleaning, coating, cooling, water film
▶ Specifications
· Spray angle: 15°~115°
Material: B, stainless steel, PVDF
(*With ceramic tip type)
Ultra High Pressure Uniform Nozzle (DSP)
▶ Features
· The world that only IKEUCHI has
Rare powerful cleaning nozzle
· Thin and strong, such as a sharp razor blade
It is characterized by an even fan-type pattern of hitting power.
· Ultra-high pressure specification for high pressure cleaning
▶ Use
High pressure cleaning (descaling, degreasing, rust removal)
▶ Specification
· Spray angle: 12°~ 15°
· Material: Stainless steel
(*With ceramic tip type)
Standard wide-angle nozzle (YYP)
▶ Features
· The center is strong due to low liquid pressure
Flow rate gradually weakening across both ends
Wide-angle fan-shaped injection of distribution
Spraying at an elevation of 75° to the center of the nozzle
· Low pressure specification, but not easily clogged
▶ Use
· Washing, foam removal, cooling, water film
▶ Specifications
· Spray angle: 100°~ 140°
· Material: B, stainless steel, various resins
(*With ceramic tip type)
Ultra-low pressure wide-angle equalizing nozzle (LYYP)
▶ Features
· Uniform flow distribution at ultra-low pressure (0.015MPa)
Ultra-wide fan-shaped injection
· A suitable force that does not generate spray bubbles.
Small injection amount type
· It is not easily blocked, and all products are oil-free treatment
▶ Use
· apply
▶ Specification
· Spray angle: 70°~ 120°
Material: PVC resin, PCTFE resin, stainless steel
Eccentric Equal Nozzle (OVVEP)
▶ Features
· Located more eccentric than the nozzle axis,
Fan spray across the spray pattern
Uniform flow distribution
· Eliminates agglomeration of spray liquid when multiple nozzles are arranged
No need to install a nozzle on a separate slope
▶ Use
· Cooling, coating, and cleaning
▶ Specification
· Spray angle: 45°, 60°
· Material: B, stainless steel
Self-cleaning standard nozzle (MOMOJet)
▶ Features
· The center is strong and gradually weakens across both ends
Fan-shaped injection of flow distribution
· When foreign substances are mixed in the injection part, the injection pressure is set to 0.03 MPa.
When lowered, the injection part is wide open to discharge foreign matter,
If the spraying pressure is raised again, it sprays normally
· The axis center of the nozzle body and the axis of the spray are matched.
Easy to arrange multiple arrangements by design
▶ Use
· Cooling, foam removal, washing, use of circulating water
▶ Specifications
· Spray angle: 80°
· Material: Stainless steel
ON/OFF control type nozzle (SO-V)
▶ Features
· The center is strong and gradually weakens across both ends
Fan-shaped injection of flow distribution
· Responsiveness by ON/OFF of control air
Excellent injection control possible
· Water does not flow down when ON/OFF
▶ Use
· Application, humidity control
▶ Specifications
· Spray angle: 15°~115°
· Material: Stainless steel
Piping direct connection type nozzle (QB)
▶ Features
· The center is strong and gradually weakens across both ends
Fan-shaped injection of flow distribution
· It is easy to connect the adapter directly to the pipe,
(Φ14.3mm) drilled and installed
· One-touch attachment and detachment to the adapter
· There are many lineups and can be distinguished by color
· Nozzle spraying direction can be adjusted below 50°
▶ Use
· Pre- and post-painting treatment, cleaning
▶ Specifications
Spray angle: 40°, 65°, 80°
· Material: Main part FRPP, some stainless steel
Air-aspirated equalizing nozzle (EJVV)
▶ Features
· Compared to standard fan-type nozzles,
Large spray width, width and thickness of spray pattern
The ratio is 3-4:1
· The passage diameter and average particle diameter of the foreign matter are applied to the standard fan-type nozzle.
Slightly larger than
When multiple nozzles are arranged, both ends of the pattern are overlapped.
When in use, the flow distribution becomes even over the entire width.
▶ Use
· Cooling, cleaning
▶ Specification
· Spray angle: 80°, 90°
· Material: B, stainless steel